Technical Data
Thickness Availabliity: .015" .020"
Standard Widths: 18" and 54" Custom sizes available
Roll Length: 25yds
Adhesive Type: NT differential adhesive. Stable polymer acrylic.
Release Liner: .004" OPP plastic. Smooth release construction.
Tape Tolerance: *typical + or - .0015"
Recomended Use: .045",.067",.107" photopolymer and rubber type plates flat
Cylinder Compatibility: Engineered for use on : Steel cylinders, polyester, fiberglass and fiber composite sleeve types, cylinder build vinyl tapes aluminum type cylinders.
Mounting Method: Exposed side to cylinder surface, liner side to printing plate.
Cusion tape ML is recomended for use with primary image high line screens in combination with fine line screen and solis type flexographic printing
Flex ML - Medium-Low Density
Polyethylene foam, closed cell, Medium-Low Density
Carrier Color: Pink
Flex MD - Medium Density
Cusion tape MD is recomended for use in combination type flexographic printing, process printing and solid ink are reproduced graphically as one image.
Carrier: Polyethylene foam, closed cell, Medium density.
Carrier Color: White
Flex MH - Medium-High Density
Cusion tape MH is recomended for solid tone coverage in flexographic printing; where primary image graphics are medium to lower line screen, with larger solid areas, and are produced in combination.
Carrier: Polyethylene foam, closed cell, medium-high density.
Carrier Color: green
Flex HD - High Density
Cusion tape HD is recomended for dense tonal reproduction of solid area images in flexographic printing, where maximum solid block ink coverage is required.
Carrier: Polyethylene foam, closed cell, medium-high density.
Carrier Color: Blue
Dansen Prepress along with Adheso Graphics is excited to introduce the next generation of Bi.esse high performance cushion-type mounting tapes, specifically developed for use with photopolymer and printing plates of all thickness ranges and types. Flexsoft cushion tapes feature an EZ mount adhesive system, greatly simplifying plate mounting procedures while improving reliability. Designed for secure hold-down during the print run, Flexsoft cushions easily release after printing, with virtually no adhesive transfer to the backside of the plate.
Flex Cushions are available in several different densities to fufill all your printing needs. Each density is color coded for easy use.
Copyright © 2009 Dansen Prepress Corporation
